A RELIABLE SOLUTION TO YOUR FREEZING PROTECTION PROBLEMS FLOW RESISTORS ELR-S
Applications:The ELR range is used for keeping cold store flow pipes above freezing. The tapes are only energized during de-freezing cycles. Advantages: Tape terminated and tested in the factory. Standard power and length. Totally sealed thanks to built-in cold terminations. Available from stock. Silicon Insulation–50°C to +180°C
Technical Characteristics:Heating element: Nickel-Chrome Insulation: Silicone Section : 6.5 x 5.5 mm Standard lengths: 1 to 12m Terminations: Silicone end-fitting Length 60mm Cold outputs: Length: 0.90m Maximum temperature: +180°C Minimum temperature: -50°C Nominal voltage: 230V Fire resistance: Does not propagate flame, halogen-free.
| | ELR-S-30 | | ELR-S-50 | | | P/N | Length | Power | Length | Power | | ELR-S-xx-1 | 1m | 30 W | 1 m | 50 W | | ELR-S-xx-2 | 2 m | 60 W | 2 m | 100 W | | ELR-S-xx-3 | 3 m | 90 W | 3 m | 150 W | | ELR-S-xx-4 | 4 m | 120 W | 4 m | 200 W | | ELR-S-xx-5 | 5 m | 150 W | 5 m | 250 W | | ELR-S-xx-6 | 6 m | 180 W | 6 m | 300 W | | ELR-S-xx-7 | 7 m | 210 W | 7 m | 350 W | | ELR-S-xx-8 | 8 m | 240 W | 8 m | 400 W | | ELR-S-xx-9 | 9 m | 270 W | 9 m | 450 W | | ELR-S-xx-10 | 10 m | 300 W | 10 m | 500 W | | ELR-S-xx-11 | 11 m | 330 W | 11 m | 550 W | | ELR-S-xx-12 | 12 m | 360 W | 12 m | 600 W |
Note: For plastic pipes installed in cold stores at low negative temperatures, we advise using self-regulating heated tape TRACECO-20 or TRACECO-30 W/m with factory assembled terminations. Recommend this article... |
