Outdoor Area Heating Mats
ELRAMP 0.50m
Snow and ice clearance for parking slip roads, outdoor path, pedestrian crossing, stairs,…
ELRAMP System is an heating mats with single-end connexion cable and sleeveless splice, which heats the floor with electric power in order to wipe out any problem caused by black ice, or to help snow melting. We recommend it in particular for slip roads, balconies, parking access, pedestrian crossing, stairs…
For the operation of these plants the FI protective circuit is necessary.
The outstanding structure of the heating cable (3 insulation layers with an additional fourth PTPE Teflon chemistry-steady insulating cover), represents a safe and long-lived operation and some substantial savings.
| Reference |
Surface (m²) | Witdh (m) | Length (m) | Voltage (V) | Power (W) |
| ELRAMP-837 | 2,79 m² | 0,5 m |
4,75 m | 230 V | 837 W |
| ELRAMP-1068 | 3.56 m² | 0,5 m |
5.95 m | 230 V | 1068 W |
| ELRAMP-1350 | 4.50 m² | 0,5 m |
7.50 m | 230 V | 1350 W |
| ELRAMP-1593 | 5.40 m² | 0,5 m |
9.00 m | 230 V | 1593 W |
| ELRAMP-1905 | 6.35 m² | 0,5 m |
10.6 m | 230 V | 1905 W |
| ELRAMP-2430 | 8.10 m² | 0,5 m |
13.5 m | 230 V | 2430 W |
OUTDOOR HEATING MAT DATASHEET
Nominal Voltage: 230V
Minimum bending Radius: 5 x dA
Insulation: XLPE
Cold Lead: 1x7,00 m (1,00 mm²)
Tolerances -5% / +10 %
Power: approx. 27 W/m
Max temp. 65°C
Diameter: approx. 7,00 mm
Minimal installation temperature: 5°C
Heating Cable/Cold Lead Junction: sleeveless technology
PRODUCT CERTIFICATION
SECTION VIEW - IN CONCRETE
PACKAGING - OUDOOR HEATING MAT IN CONCRETE
Standard length supplied with assembly instructions
ELTRACE HEATING CABLE PRINTING
All products are printed to ensure product traceability.
INSTALLATION
Heating Mats must be installed according to the standards (NF C 15-100, VDE ...) to the points where they apply, following the recommendations of use.
ADDITIONAL MATERIALS
| Product | Reference |
Description |
| Junction Box |
ELBE-8 ELBE-10 |
Junction box |
| Thermostat |
ETO2 ELTE-1/2 ELTH-Ax |
Electronic controler Electronic thermostat with PT100 sensor Ambiant Thermostat (capilary) |
|
Temperature and humidity sensor |
ETO-G |
Humidity and temperature sensor for the ground allows to set the current in motion just if there is snow or humidity (for ETO2 controller) |
| Next > |
|---|
