FROST PROTECTION AGAINST ICE AND LOW TEMPERATURE MAINTENANCE FOR PIPE, TANK, RECEPTACLES, VALVES, GUTTERS…

By using our tracers TRACECO® type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.  
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The CableBox storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®

HEATING CABLE DESCRIPTION

Bus wire Cu nickel-plated (2 x 0.55mm²)  
Self limiting heating element
Insultation
Tin-plated copper protective earth wires with Protective aluminium foil
Thermoplastique (TPE-O) outer jacket (Black)

Reference    Désignation    Power    Dimension (naked)    Dimension
TRACECO-15    TRACECO ESR-S-15-AO    12 W/m àat10°C    6,40 x 3,80 (mm)     7,30 x 5,10 (mm)

HEATING CABLE DATASHEET

Nominal Voltage 230V

Maximum length circuit: TRACECO-15…………. 110 m
Tolerances -0/+5 W    
Maximum exposure temperature (energised) 65°C         
Maximum exposure temperature (deenergised) 80°C         
Temperature Class T6                 
Minimum Bending Radius 27 mm                    
Minimum installation temperature -35°C

Weight approx (alufoil) 66 kg/km

Weight approx (Braided) 72 kg/km

CERTIFICATION
CSTB, ATEX, VDE, GOST-R, FIMKO, CE

CIRCUIT LENGTH*


*Maximum Circuit lengths with ELCB curve C
The protection of each circuit shall be in accordance with NF C 15-100.
The protection of persons is ensured by a residual current of 30 mA maximum for each 7.5 kilowatts maximum. The heaters are supplied at 230 volts.

PACKAGING
Standard length on rolls : 500m / CableBox® : 100m

MARQUAGE
Tous les câbles autorégulants ELTRACE sont marqués afin d'assurer la traçabilité du produit.

INSTALLATION
Les câbles autorégulants ELTRACE doivent être installés suivant les normes en vigueur au jour de l’installation (cahier des prescriptions techniques communes de mise en œuvre du CSTB, NF C 15-100, VDE…) pour les points où elles s'appliquent, ainsi que les préconisations d'utilisation.

SELF LIMITING HEATING CABLE

ESR®-S - Food Compatibility

FOR FROST PROTECTION INSIDE PIPE

Self-regulating heating cables ESR-S-BOA have been developed to meet standards
food. You can safely place them inside the pipes. They allow you prevent freezing and the risk of bursting pipes.
The parallel technology "self regulating" allows easy operation safely. Self-regulated power
cable varies with the ambient temperature and prevents overheating. When it's cold
the polymer shrinks and facilitates the flow of current, thereby increasing the temperature cable.
As it gets warmer, the polymer expands and prevents the passage of current: the cable cooler.
Finally,with a technology called "parallel" you can cut the heating cables directly to the desired length on the site, to precisely fit the length of heating cable for your needs.
The storage system on coil type Cablebox ® allows easy handling, quick and convenient.

DESCRIPTION

Bus wire Cu nickel-plated (2 x 0.55mm²)  
Self limiting heating element
Insultation
Tin-plated copper protective earth wires with Protective aluminium foil
Food compatibility outer jacket

Référence    Désignation    Puissance    Section totale
ESR-S-BOA-10    Self Limiting Cable Food Compatibility    10 W/m à 10°C    7,6 x 5,2 (mm)
ESR-S-BOA-15    Self Limiting Cable Food Compatibility    15 W/m à 10°C    7,6 x 5,2 (mm)
ESR-S-BOA-18    Self Limiting Cable Food Compatibility    18 W/m à 10°C    7,6 x 5,2 (mm)

DATASHEET

Nominal Voltage 230V                         Maximum length circuit:
Tolerances -0/+5 W                             ESR-S-BOA-10…………. 100 m
Maximum exposure temperature (energised) 65°C         ESR-S-BOA-15………….   72 m
Maximum exposure temperature (deenergised) 65°C         ESR-S-BOA-18………….   60 m     
Minimum Bending Radius 35 mm
Minimum installation temperature -35°C     

CERTIFICATION

CSTB, ATEX, VDE, GOST-R, FIMKO, CE

CIRCUIT LENGTH*

DESIGNATION      STARTING
TEMPERATURE (°C)      10 A
ESR-S-10-BOA    10°C    100 / 60**
ESR-S-10-BOA    0°C    95
ESR-S-10-BOA    -20°C    77
ESR-S-15-BOA    10°C    72
ESR-S-15-BOA    0°C    66
ESR-S-15-BOA    -20°C    52
ESR-S-18-BOA    10°C    60
ESR-S-18-BOA    0°C    58
ESR-S-18-BOA    -20°C    41
*Maximum Circuit lengths with ELCB curve C
The protection of each circuit shall be in accordance with NF C 15-100.
The protection of persons is ensured by a residual current of 30 mA maximum for each 7.5 kilowatts maximum. The heaters are supplied at 230 volts.

PACKING
Standard length stored on reel: 500m / CableBox® : 100m

PRINTING
All cables are printed in order to ensure the product tracability.

INSTALLATION
ELTRACE self-regulating cables must be installed according to standards prevailing at the date of installation (technical requirements specification for implementation of NF C 15-100, VDE ...) where they apply, and the recommendations of use.

ADDITIONAL PRODUCTS
Reference    Non-ATEX    ATEX
Connexion    Domoclick®  
ELKSR-1, ELKSR    ELKSR-1-e
ELKSR-1-d
Junction Boxes    ELBE-3, ELBE-6, ELBE-8, ELBE-10    ELBA-5-e, ELBA-6-e
ELBA-4-d, ELBA-6-d
Pipe bracket
ELSP-x, ELSP-P1/F, ELSP-P2/F    ELSP-2, ELSP-3, ELSP-4, ELSP-5, ELSP-PU
Thermostats    ELTE-x,
ELTH-A2, ELTH-A3, ELTH-A4    ELTH-Athf-Ex
ELBSTW
Fixing tape    ELAA
ELTV    ELAA
ELTV
Heat Lagging Output    ELSC, ELSC-E    ELSC-E
Adhesive Label    ELET    ELET

CÂBLES CHAUFFANTS AUTORÉGULANTS EAU-CHAUDE

Câble chauffant électrique TRACECO^®-W

Télécharger la fiche technique du câble chauffant autorégulant électrique TRACECO-W

POUR LE MAINTIEN EN MOYENNE TEMPÉRATURE OU POUR LUTTER CONTRE LES RISQUES DE LÉGIONELLOSE DE VOS TUYAUTERIES, RÉSEAU EAU CHAUDE SANITAIRE, EAU USÉE GRASSE, RÉSERVOIRS, CHÉNEAUX, VANNES,..

En utilisant nos traceurs type TRACECO^® vous vous assurez du meilleur système de traçage électrique. Ils sont conçus pour maintenir les réseaux d'eau chaude sanitaire à température et lutter contre les risques de légionellose. La technologie "autorégulante" permet une utilisation simple en toute sécurité.  La puissance autorégulée des câbles varie en fonction de la température environnante et interdit toute surchauffe.
Lorsqu’il fait froid, le polymère se contracte et facilite le passage du courant ce qui permet une augmentation de la température du câble. Et plus il fait chaud, plus le polymère se dilate et empêche le passage du courant, par conséquent le câble chauffe moins.
Enfin, la technologie dite « parallèle » permet de couper les câbles chauffants à la longueur souhaitée directement sur le site, afin d’adapter avec précision la longueur du câble chauffant à vos besoins. Son système de stockage sur bobine type CABLEBOX® permet une manipulation simple, rapide et pratique. Ce produit est disponible en stock et utilisable avec le système de raccordement rapide DOMOCLICK^®

DESCRIPTION

1- Conducteurs formés de 2 torons de cuivre nickelé composés de 19 fils de 0,287mm de diamètre et de section 1.23mm²
2- Matrice semi-conductrice réticulée par irradiation
3- Isolant polyoléfine Gris
4- Blindage par tresse en cuivre étamé ou par ruban aluminium + drain
5- Gaine Thermoplastique Grise

Self Limiting Heating Cable

ESR^®-R

To Protect Sliding Doors and Opening Doors From Freezing Up - Special Cold Room

By using our self-regulating electric heat tracing ESR-R, you make sure that you get the best defrosting system for negative cold room door.

Through its unique "self regulating" matrix, it is easier and safer to use. you freed from the problems of door sizes.

A single cable replaces all your references, all you resistances, whatever the length of the doors.

Furthermore, the self-regulating heating cable is varying according to its temperature. This avoid overheating especially at the corners of doors (no dysfunction).

Finally, thanks to his "Self limiting" technology called "parallel". You can connect the heating cable ESR-R to the exact length you want. Also you can connect directly into the junction box. Then you do not have to prepare any cold end and thus saving time and substantial cost.

Its storage system on coil type CableBox or bobbins allows easy handling, quick and convenient. This product is available on stock.

DESCRIPTION DES CORDONS CHAUFFANTS

1. Bus wire Cu nickel-plated (2x0.55mm²) 19 x 0,287 mm

2. Self limiting heating element (matrix)

3. Insultation (polyolefine)

Référence    Désignation    power at 0°C    Section
ESR-R-30    ESR-R-30    27 W/m at 0°C    6,10 x 5,60 (mm)
ESR-R-40    ESR-R-40    38 W/m at 0°C    6,10 x 5,60  (mm)

Datasheet

Nominal Voltage 230V                                                                      
Tolerances -0/+5 W
Maximum exposure temperature (energised) 50°C
Maximum exposure temperature (deenergised) 55°C
Minimum Bending Radius 30 mm
Minimum installation temperature -35°C
Weight approx. 41,5 kg/km

Maximum length circuit:
ESR-R-30…………. 110 m
ESR-R-40…………. 110 m