SELF LIMITING HEATING CABLE

ESR®-S - Food Compatibility

FOR FROST PROTECTION INSIDE PIPE

Self-regulating heating cables ESR-S-BOA have been developed to meet standards
food. You can safely place them inside the pipes. They allow you prevent freezing and the risk of bursting pipes.
The parallel technology "self regulating" allows easy operation safely. Self-regulated power
cable varies with the ambient temperature and prevents overheating. When it's cold
the polymer shrinks and facilitates the flow of current, thereby increasing the temperature cable.
As it gets warmer, the polymer expands and prevents the passage of current: the cable cooler.
Finally,with a technology called "parallel" you can cut the heating cables directly to the desired length on the site, to precisely fit the length of heating cable for your needs.
The storage system on coil type Cablebox ® allows easy handling, quick and convenient.

DESCRIPTION

Bus wire Cu nickel-plated (2 x 0.55mm²)  
Self limiting heating element
Insultation
Tin-plated copper protective earth wires with Protective aluminium foil
Food compatibility outer jacket

Référence    Désignation    Puissance    Section totale
ESR-S-BOA-10    Self Limiting Cable Food Compatibility    10 W/m à 10°C    7,6 x 5,2 (mm)
ESR-S-BOA-15    Self Limiting Cable Food Compatibility    15 W/m à 10°C    7,6 x 5,2 (mm)
ESR-S-BOA-18    Self Limiting Cable Food Compatibility    18 W/m à 10°C    7,6 x 5,2 (mm)

DATASHEET

Nominal Voltage 230V                         Maximum length circuit:
Tolerances -0/+5 W                             ESR-S-BOA-10…………. 100 m
Maximum exposure temperature (energised) 65°C         ESR-S-BOA-15………….   72 m
Maximum exposure temperature (deenergised) 65°C         ESR-S-BOA-18………….   60 m     
Minimum Bending Radius 35 mm
Minimum installation temperature -35°C     

CERTIFICATION

CSTB, ATEX, VDE, GOST-R, FIMKO, CE

CIRCUIT LENGTH*

DESIGNATION      STARTING
TEMPERATURE (°C)      10 A
ESR-S-10-BOA    10°C    100 / 60**
ESR-S-10-BOA    0°C    95
ESR-S-10-BOA    -20°C    77
ESR-S-15-BOA    10°C    72
ESR-S-15-BOA    0°C    66
ESR-S-15-BOA    -20°C    52
ESR-S-18-BOA    10°C    60
ESR-S-18-BOA    0°C    58
ESR-S-18-BOA    -20°C    41
*Maximum Circuit lengths with ELCB curve C
The protection of each circuit shall be in accordance with NF C 15-100.
The protection of persons is ensured by a residual current of 30 mA maximum for each 7.5 kilowatts maximum. The heaters are supplied at 230 volts.

PACKING
Standard length stored on reel: 500m / CableBox® : 100m

PRINTING
All cables are printed in order to ensure the product tracability.

INSTALLATION
ELTRACE self-regulating cables must be installed according to standards prevailing at the date of installation (technical requirements specification for implementation of NF C 15-100, VDE ...) where they apply, and the recommendations of use.

ADDITIONAL PRODUCTS
Reference    Non-ATEX    ATEX
Connexion    Domoclick®  
ELKSR-1, ELKSR    ELKSR-1-e
ELKSR-1-d
Junction Boxes    ELBE-3, ELBE-6, ELBE-8, ELBE-10    ELBA-5-e, ELBA-6-e
ELBA-4-d, ELBA-6-d
Pipe bracket
ELSP-x, ELSP-P1/F, ELSP-P2/F    ELSP-2, ELSP-3, ELSP-4, ELSP-5, ELSP-PU
Thermostats    ELTE-x,
ELTH-A2, ELTH-A3, ELTH-A4    ELTH-Athf-Ex
ELBSTW
Fixing tape    ELAA
ELTV    ELAA
ELTV
Heat Lagging Output    ELSC, ELSC-E    ELSC-E
Adhesive Label    ELET    ELET

Self Limiting Heating Cable

GELTRACE®-PROTIGEL

FROST PROTECTING TAPE IS A RELIABLE AND ECONOMICAL SOLUTION TO YOUR PROBLEMS OF FROST PROTECTION

Applications:

GELTRACE^® range is used for the frost protection of pipes. In the protigel®+ version, the thermostat automatically switches on the tape when the temperature falls under +5°C. It enables substantial energy savings and offers in complement the advantages and the safety of a self-regulating tape.

Avoids drainings and permanent use of hydraulic networks. Easy to implement. Available on stock.

Adjustable length according to the network size. Tape finished and controlled in the factory.

No overheating risk thanks to its self regulating system.

When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.

Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.

Description

1. Bus wire Cu nickel-plated (2 x 0.55mm²)

2. Self limiting heating element

3. Insultation

4. Tin-plated copper protective earth wires with Protective aluminium foil

5. Thermoplastique (TPE-O) outer jacket (Black)

6. Thermostat 5°C

7. Cold lead (1m 3x1.5mm²)

Reference    Designation    Power
GELTRACE-1    Self Limiting cable, 1m lenght, with 5°C thermostat and 1m cold lead    15 W at 10°C
GELTRACE-xx    Self Limiting cable, 1m to 35m lenght, with 5°C thermostat, 1m cold lead    15 W/m at 10°C
GELTRACE-35    Self Limiting cable, 35m lenght, with 5°C thermostat, 1m cold lead    450 W à 10°C

DATASHEET

Nominal Voltage 230V
Maximum length circuit: GELTRACE-35…………. 35 m
Tolérances sur la puissance -0/+5 W
Maximum exposure temperature (energised) 65°C         
Maximum exposure temperature (deenergised) 80°C         
Temperature Class T6                
Minimum Bending Radius 27 mm
Minimum installation temperature -35°C
Weight approx 66 kg/km

QUALIFICATIONS

Certifications CE