SELF REGULATING HEATING CABLE
Heat tracing TRACECO®
Frost Protection against ice and low temperature maintenance for Pipe, Tank, Receptacles, valves, gutters…
By using our tracers TRACECO® type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The CableBox storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®
DESCRIPTION
1. Bus wire Cu nickel-plated (2x1.25mm²)
2. Self limiting heating element
3. Insultation
4. Tin-plated copper protective earth wires with Protective aluminium foil
5. Thermoplastique (TPE-O) outer jacket (Black)
| Reference | Designation / Power |
Section |
| TRACECO-10 | TRACECO ESR-10-AO 10 W/m à 10°C | 13 x 4,9 (mm) |
| TRACECO-20 | TRACECO ESR-20-AO 20 W/m à 10°C | 13 x 4,9 (mm) |
| TRACECO-30 | TRACECO ESR-30-AO 30 W/m à 10°C | 15,6 x 4,3 (mm) |
| TRACECO-40 | TRACECO ESR-40-AO 40 W/m à 10°C | 15,6 x 4,3 (mm) |
DATASHEET
Nominal Voltage 230V
Tolerance -0/+5 W
Maximum exposure temperature (energised) 65°C
Maximum exposure temperature (deenergised) 80°C
Temperature Class T6
Minimum Bending Radius 25 mm
Minimum installation temperature -35°C Weight approx. 90-105 kg/km (alufoil)
Résistance maxi du conducteur à 20 °C 15.29 Ω/km Weight approx. 105-126 kg/km (braid)
maximum length circuit:
TRACECO-10…………. 215 m
TRACECO-20…………. 170 m
TRACECO-30…………. 140 m
TRACECO-40…………. 127 m
| Next > |
|---|
