FROST PROTECTION AGAINST ICE AND LOW TEMPERATURE MAINTENANCE FOR PIPE, TANK, RECEPTACLES, VALVES, GUTTERS…

By using our tracers TRACECO® type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.  
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The CableBox storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®

HEATING CABLE DESCRIPTION

Bus wire Cu nickel-plated (2 x 0.55mm²)  
Self limiting heating element
Insultation
Tin-plated copper protective earth wires with Protective aluminium foil
Thermoplastique (TPE-O) outer jacket (Black)

Reference    Désignation    Power    Dimension (naked)    Dimension
TRACECO-15    TRACECO ESR-S-15-AO    12 W/m àat10°C    6,40 x 3,80 (mm)     7,30 x 5,10 (mm)

HEATING CABLE DATASHEET

Nominal Voltage 230V

Maximum length circuit: TRACECO-15…………. 110 m
Tolerances -0/+5 W    
Maximum exposure temperature (energised) 65°C         
Maximum exposure temperature (deenergised) 80°C         
Temperature Class T6                 
Minimum Bending Radius 27 mm                    
Minimum installation temperature -35°C

Weight approx (alufoil) 66 kg/km

Weight approx (Braided) 72 kg/km

CERTIFICATION
CSTB, ATEX, VDE, GOST-R, FIMKO, CE

CIRCUIT LENGTH*


*Maximum Circuit lengths with ELCB curve C
The protection of each circuit shall be in accordance with NF C 15-100.
The protection of persons is ensured by a residual current of 30 mA maximum for each 7.5 kilowatts maximum. The heaters are supplied at 230 volts.

PACKAGING
Standard length on rolls : 500m / CableBox® : 100m

MARQUAGE
Tous les câbles autorégulants ELTRACE sont marqués afin d'assurer la traçabilité du produit.

INSTALLATION
Les câbles autorégulants ELTRACE doivent être installés suivant les normes en vigueur au jour de l’installation (cahier des prescriptions techniques communes de mise en œuvre du CSTB, NF C 15-100, VDE…) pour les points où elles s'appliquent, ainsi que les préconisations d'utilisation.