SELF LIMITING HEATING CABLE

ESR®-BOT

The ESR-BOT tape is a self-limiting heating tape for applications for general protection against freezing in pipes. An additional layer connected to the heating element (bonded jacket) increases the effect of the electrical insulation and provides additional protection against moisture.

Fluoropolymer is used as an outer jacket, this material offers increased protection against chemicals

and abrasion. Fluoropolymers are also UV-resistant.

When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.

Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.

The CableBox storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®

DESCRIPTION

Bus wire Cu nickel-plated (2x1.25mm²)

Self limiting heating element, Matrix

Insulation

Braid

Fluoropolymer overjacket

Reference    Designation    Power    Dimension

ESR-10-BOT    ESR-2-BOT-10    10 W/m at 10°C    11,50 x 5,50 (mm)

ESR-15-BOT    ESR-2-BOT-15    15 W/m at 10°C    11,50 x 5,50 (mm)

ESR-20-BOT    ESR-2-BOT-20    20 W/m at 10°C    11,50 x 5,50 (mm)

ESR-25-BOT    ESR-2-BOT-25    25 W/m at 10°C    11,50 x 5,50 (mm)

ESR-30-BOT    ESR-2-BOT-33    33 W/m at 10°C    11,50 x 5,50 (mm)

DATASHEET

Nominal Voltage 230V                         Maximum length circuit:

Tolerances -0/+5 W                             ESR-10-BOT…………. 205 m

Maximum exposure temperature (energised) 65°C         ESR-15-BOT…………. 160 m

Maximum exposure temperature (deenergised) 80°C         ESR-20-BOT…………. 140 m

Temperature Class T6 (T5 for 33W/m)                ESR-25-BOT…………. 130 m

Minimum Bending Radius 25 mm                     ESR-30-BOT…………. 110 m

Minimum installation temperature -35°C                 Weight approx 119kg/km

CERTIFICATION

CSTB, ATEX, VDE, GOST-R, CE

CIRCUIT LENGTH*

*Maximum Circuit lengths with ELCB curve C

The protection of each circuit shall be in accordance with NF C 15-100. The protection of persons is ensured by a residual current of 30 mA maximum for each 7.5 kilowatts maximum. The heaters are supplied at 230 volts.

PACKING

Standard length stored on reel: 500m / CableBox® : 100m

PRINTING

All cables are printed in order to ensure the product tracability.

INSTALLATION

ELTRACE self-regulating cables must be installed according to standards prevailing at the date of installation (technical requirements specification for implementation of NF C 15-100, VDE ...) where they apply,

ADDITIONAL PRODUCTS