Eltrace self-regulating heating cables are used for frost protection for pipe, tanks, containers, as well as for deicing eaves gutter and descents.
Avoid frost in negative cold rooms. To maintain the temperature of pipes, tanks, containers ... May be cut to any length and avoid overheating. Easy to use.
Applications:
GELTRACE™ range is used for the frost protection of pipes. In the protigel™+ version, the thermostat automatically switches on the tape when the temperature falls under +5°C. It enables substantial energy savings and offers in complement the advantages and the safety of a self-regulating tape.
Avoids drainings and permanent use of hydraulic networks. Easy to implement. Available on stock.
Adjustable length according to the network size. Tape finished and controlled in the factory.
No overheating risk thanks to its self regulating system.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
Reference | Designation | Power |
GELTRACE-1 | Self Limiting cable, 1m lenght, with 5°C thermostat and 1m cold lead | 15 W at 10°C |
GELTRACE-xx | Self Limiting cable, 1m to 35m lenght, with 5°C thermostat, 1m cold lead (available from 1 to 35m) | 15 W/m at 10°C |
GELTRACE-35 | Self Limiting cable, 35m lenght, with 5°C thermostat, 1m cold lead | 450 W at 10°C |
Read more: Ready to use GELTRACE self limiting heating cable
By using our tracers TRACECO® type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®
DESCRIPTION
Download Self Regulating Heating Cable TRACECO Datasheet
By using our heat tracer type TRACECO-W you get the best heat tracing system. They are designed to maintain networks of warm water temperature and avoid the risk of legionella.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClickTM
Download the technical datasheet TRACECO-W heating cable
It allows steam cleaning in pipes. The heating element, the insulation and the outer jacket of the ESR-H-BOT are made of fluoropolymers.
The Fluoropolymer is Used as an outer jacket, this material offers increased protection against chemicals
and abrasion.
The heating power of the conductive heating element increases or decreases depending on the ambient
temperature. The self-limitation takes effect at every point along the heating tape. The heating power
adapts to the varying ambient temperatures.
High Temp. Heat Tracing
Nominal Voltage 230V
Tolerances -2.5/+2.5 W
Maximum exposure temperature (energised) 120°C
Maximum exposure temperature (deenergised) 200°C
Temperature Class T3 (T2 for 60w/m)
Minimum Bending Radius 25 mm
Minimum installation temperature -40°C
Weight approx 120 kg/km
ESR-H-2-BOT-10………….. 205 m
ESR-H-2-BOT-15………….. 190 m
ESR-H-2-BOT-30………….. 115 m
ESR-H-2-BOT-45………….. 85 m
ESR-H-2-BOT-60………….. 65 m
Certifications ATEX, GOST-R, EAC, CE
Download ESR-H-BOT heating cable DataSheet
Reference Designation Power Dimension
ESR-R-30 TRACECO-R - ESR-R-30 27 W/m at 0°C 6.10×5.60 (mm)
ESR-R-40 TRACECO-R - ESR-R-40 38 W/m at0°C 6.10×5.60 (mm)
EAC, RoHS, REACH
Download ESR-R heating cable DataSheet
The ESR-BOT tape is a self-limiting heating tape for applications for general protection against freezing in pipes. An additional layer connected to the heating element (bonded jacket) increases the effect of the electrical insulation and provides additional protection against moisture.
Fluoropolymer is used as an outer jacket, this material offers increased protection against chemicals
and abrasion. Fluoropolymers are also UV-resistant.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®
Reference | Designation | Power | Dimension |
ESR-10-BOT | ESR-2-BOT-10 | 10 W/m at 10°C | 11,50 x 5,50 (mm) |
ESR-15-BOT | ESR-2-BOT-15 | 15 W/m at 10°C | 11,50 x 5,50 (mm |
ESR-20-BOT | ESR-2-BOT-20 | 20 W/m at 10°C | 11,50 x 5,50 (mm) |
ESR-25-BOT | ESR-2-BOT-25 | 25 W/m at 10°C | 11,50 x 5,50 (mm) |
ESR-30-BOT | ESR-2-BOT-33 | 33 W/m at 10°C | 11,50 x 5,50 (mm) |
ATEX, GOST-R, EAC, CE
Download ESR-BOT heat cable datasheet
By using our tracers TRACECO(TM) type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing. Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs. The Box storage system on coil allows easy handling, quick and convenient.
Reference | Désignation | Power | Dimension (first insulation) | Dimension (overjacketed) |
TRACECO-15 | TRACECO ESR-S-12-AO | 12 W/m at 10°C | 6.40×3.80 (mm) | 8.10×5.30 (mm) |
CSTB, EAC, CE, IP67, RoHS, REACH, UV-Resistant
Download the Self Regulating Heating cable TRACECO-S Datasheet
Download Self Regulating Heating Cables Datasheet