Contact us right now !

  • Technical information on our heating cables ?
  • An RFQ for heating cables or any other question ...?
  • Contact us now our technical teams, commercial, logistics are at your disposal.

Contact us now

Accessories

ELTRACE provides a full range of heat tracing accessories

One Box for all your Self Regulating Heating Cables

CableboxThe Box

  • Câble unwinding machine, simple, handy, light
  • Ideal for construction site, cable box offers you comfort and quick installation
  • Adapted to any configuration, you can use the cable box easily to unwind you cable.
  • Thanks to the cable box you can unwind your heating cables without fearing stuck spool and turn spring effect. You will avoid as well tension on the cable while unwinding it.
  • Its weight, really light (less than 0,830 kg empty) offers you more use facility and less tiredness.
  • Thanks to its compact dimensions (23cm X 33cm X 33cm), it will be easy for you to store it in your vehicule or shop.
  • The cable box offers a strong protection against construction site vagaries.
  • This will allow you to protect efficiently your cables against mechanical attack.
  • The cable box offers comfort during transport and handling with no risks for your cables and handy for his user.
  • Thanks to its handle, you can move your heating cables everywhere to have access to your construction sites without difficulties.



DOMOCLICKTM DHB-100 Fast Electrical Connector

CONNECTEUR RAPIDE DOMOCLICK

CONNECTION ST WITH ELECRRICAL SUPPLY AND END CAP

Connection set with electrical supply for the junction between the ELTRACE heating cable and the supply cable.
Box and cover in polyamid, Domoclick Heating Cable Connector, Ligature, Incorporated electrical connection including cablegland PG 16, Stirrups for wall mounting, CE

Domoclick ConnecteurCOMPOSITION

  1. Incorporated electric supply boxDomoclick Heating Cable Connector
  2. Terminal
  3. Heat-resistant ligatures
  4. Stirrups for wall mounting
  5. Self-adhesive labels “electric supply” and “terminal”

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

FAST INSTALLATION

It takes only a few minutes to assemble the Click, for it involves only four stages:

  • Insert the band into the cover and the metal cone
  • Strip the band end.
  • Insert the heating tape into the Click.
  • Push the lever and shut the cover.

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

DOMOCLICK DHB-101TM INLINE JUNCTION

 Domoclick Jonction en ligne

DomoClick junction set with 1 terminal Domoclick Connector

Box and cover in polyamid, Ligature, Incorporated electrical connection including cablegland PG 16, Stirrups for wall mounting  CE

Domoclick DHB-101 Jonction en ligneCOMPOSITION

  1. One junction
  2. One terminal
  3. Two heat-resistant ligatures
  4. Two stirrups for wall mounting
  5. self-adhesive labels “electric supply” and “terminal”

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

FAST INSTALLATIO

It takes only a few minutes to assemble the Click, for it involves only four stages:

  • Insert the band into the cover and the metal cone
  • Strip the band end.
  • Insert the heating tape into the Click.
  • Push the lever and shut the cover.

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

DOMOCLICKTM DHB-102: 1 supply, 2 heating cables

 Domoclick alimentation électrique et deux départs de câble chauffant

Junction set with electrical supply for the junction between two heating tapes and the supply cable

Box and cover in polyamid, Ligature, Incorporated electrical connection including cablegland PG 16, Stirrups for wall mounting  CE.

Domoclick DHB-102 une alimentation électrique et deux départs rubans chauffantsCOMPOSITION

  1. Incorporated electric supply boxDomoclick heating cable connector
  2. Two terminals
  3. Two heat-resistant ligatures
  4. Two stirrups for wall mounting
  5. Self-adhesive labels “electric supply” and “terminal”.

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

FAST INSTALLATION

It takes only a few minutes to assemble the Click, for it involves only four stages:

  • Insert the band into the cover and the metal cone
  • Strip the band end.
  • Insert the heating tape into the Click.
  • Push the lever and shut the cover.

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

DOMOCLICKTM DHB-103 - T Derivation

 Domoclick Dérivation en T, 3 départs câbles chauffants

DOMOCLICK DHB-103: T-Derivation

DOMOCLICK™ T derivation set for  the junction between three heating tapes (for example for a T derivation or extending a circuit..

Domoclick DHB-103 Dérivation en T pour la liaison de 3 câbles autorégulants chauffantsCOMPOSITION

  1. T derivation
  2. Two terminals
  3. Three Heat-resistant ligatures
  4. Three stirrups for wall mounting
  5. Self-adhesive labels “electric supply” and “terminal”

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

FAST INSTALLATION

It takes only a few minutes to assemble the Click, for it involves only four stages:

  • Insert the band into the cover and the metal cone
  • Strip the band end.
  • Insert the heating tape into the Click.
  • Push the lever and shut the cover.

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

DOMOCLICKTM DHB-104: T derivation set with electrical supply

 Dérivation en T avec alimentation électrique

DOMOCLICKTM) DHB-104: Electrical supply and T-Derivation (3 heating cables)

DOMOCLICK™ T-derivation set with electrical supply for the junction between three heating tapes and the supply cable
Box and cover in polyamid, Ligature, Incorporated electrical connection including cablegland PG 16 for DHB 104, Stirrups for wall mounting  CE

Domoclick DHB-104 Dérivation en T pour la liaison de 3 câbles autorégulants chauffants et alimentation électriqueCOMPOSITION DU CONNECTEUR DOMOCLICK

  1. T derivation with electrical supply
  2. Three terminations
  3. Three heat-resistant ligatures
  4. Three stirrups for wall mounting
  5. Self-adhesive labels “electric supply” and “terminal”

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

FAST INSTALLATION

It takes only a few minutes to assemble the Click, for it involves only four stages:

  • Insert the band into the cover and the metal cone
  • Strip the band end.
  • Insert the heating tape into the Click.
  • Push the lever and shut the cover.

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

Junction set with electrical supply for the junction between two heating tapes and the supply cable DOMOCLICKTM DHB-105

T-tap set for distribution in tablecloths

Junction set with electrical supply for the junction between two heating tapes and the supply cable
Box and cover in polyamid, Ligature, Incorporated electrical connection including cablegland PG 16, Stirrups for wall mounting  CE

COMPOSITION

  1. Incorporated electric supply boxDomoclick heating cable connector
  2. Two terminals
  3. Two heat-resistant ligatures
  4. Two stirrups for wall mounting
  5. Self-adhesive labels “electric supply” and “terminal”

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

FAST INSTALLATION

It takes only a few minutes to assemble the Click, for it involves only four stages:

  • Insert the band into the cover and the metal cone
  • Strip the band end.
  • Insert the heating tape into the Click.
  • Push the lever and shut the cover.

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

DOMOCLICKTM DHB-400 HEATING CABLE TERMINATION

 Capuchon d'extrémitié de câble chauffant

End Cap

COMPOSITION

  1. Terminaison with GLUE inside; IP68
  2. Self adhesive label "terminaison".

EASY TO USE

Eltrace heating tapes are supplied and connected between themselves with a minimum of manipulations. Only a knife in needed to strip the band ends. The different clicks are made up of only three parts.

SURE

The mounting stages are visible and easily controllable. The upper and lower blades guarantee a sure contact

 

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

Energy efficient control of ice and snow melting

Régulateur électronique pour la fonte de gel et verglas

An intelligent all-in-one solution for ice and snow melting usable for all applications within hydronic as well as electrical heating. Optimal operation is ensured due to output control which makes the system both effective and economical. ETO2 offers you the possibility of snow melting—the green way.

  • Electronic on/off control up to 11KW
  • 2 zone control, individually controlled at the same time
  • Economical control-minimising energy consumption
  • Adjustable moisture sensitivity
  • Detection of temperature and moisture
  • Display and “knob wheel” for easy programming
  • Control of electrical or water-based ice and snow melting systems
  • Language options

WE CANNOT CHANGE THE WEATHER - BUT WE DO CONTROL THE CONSEQUENCES

We has developed the ETO2 controller for ice and snow melting in gutters and ground areas. Using readings from temperature and moisture sensors, the controller ensures economical control of power consumptions when keeping out door areas and roofs free of ice and snow. The moisture sensor is installed in the surface of the out door area or placed in the gutter. As soon as moisture is detected, the ETO2 controller activates the snow melting system. Once the sensor has driedout, the thermostat immediately goes in after run and the system will continue to provide heat for a chosen time.

THERMOSTAT FUNCTION SENSURING MINIMAL ENERGY COMSUMPTION

The snow melting system will be energized only when the outdoor temperature is below the selected setting and snow or ice occurs on the sensors. This way you only use energy when absolutely needed.

For Gutters-ETO2-4550,ETOR-55 and ETF-744/99:
The sensor type ETOR is designed for mounting in gutters and downpipes etc. ETOR detects moisture, while ETF detects temperature.

For Outdoor areas - ETO2-4550 and ETOG-55 isused:
The sensor type ETOG is designed for embedding into the surface of the outdoor area. ETOG detects ground temperature and moisture. The air sensor type ETF-744/99 can be used for measuring rapidly temperature decreases.

Download ETO Electronic controler Datasheet

Thermostat d'ambiance et surface

Ambiant and Surface Thermostat ELTH-A5

The ELTH-A5 thermostat  is a temperature control thermostat which allows the direct connection to the output of one (1) or two (2) heating cables or one (1) or two electric cables (type RVFV-U1000-3G2. 5) plus the direct connection of a power cable (type RVFV-U1000-3G2.5).
It can be used in industrial environments (refrigeration industry, maturation, etc.). It is perfectly adapted to the building and construction industry market.
The thermostat is liquid expansion type. It is a sensitive element with tinned copper bulb with stainless steel membrane.
Depending on the type of cable and number of cable, please follow the appropriate option. .

Alimentation et deux départs rubansAmbiant and Surface Thermostat ELTH-A5

  • Adjustable from + 0 ° C to + 90 ° C
  • Switching capacity: 16A / 230V
  • Thermostat housing 125x125x70 with regulation
  • system and bulb included.
  • Transparent cover for case (125x125x25)
  • Protection: IP 65
  • Housing: Thermoplastic Shockproof
  • Probe and Capillary: Copper.
  • Temp. Max. Bulb: 120 ° C

Dimension du thermostat ELTH-A5The housing has the following openings:

  • 2 x M16/M25
  • 2 x M16/M25
  • 3 x M12/M20
  • 3 x M12/M20

Can be used with the whole range of ELTRACE heating cables

Download the Technical datasheet

Subcategories

DOMOCLICKTM FAST CONNECTOR for ELTRACETM Self Limiting Heating Cable

EASY CONNECTION

ELTRACE heating cable are powered and connected together with minimal handling. Only a knife is needed to strip the ribbons. The different Clicks consist of only three parts.

SAFE CONNECTORS

The assembly steps are clearly visible and easily controllable. Upper and lower double blades ensure safe contact.

QUICK CONNECTORS

The installation of the DOMOCLICK lasts only a few minutes, because it only has four steps:

  1. Insert the ribbon into the lid and the metal cone
  2. Strip the ribbon
  3. Insert the heating ribbon into the Click
  4. Press the lid and close the lid

CONNECTORS SUITABLE FOR ALL SITUATIONS

DOMOCLICK DHB-100: Fast electrical connector

DOMOCLICK DHB-101: Junction set for the junction between two heating tapes (for example for extending a circuit).

DOMOCLICK DHB-102: Junction set with electrical supply for the junction between two heating tapes and the supply cable.

DOMOCLICK DHB-103: T-Derivation set for the junction between three heating tapes.

DOMOCLICK DHB-104: T-Derivation set with electrical supply for the junction between three heating tapes and the supply cable

DOMOCLICK DHB-105: T-Derivation set for the junction between three heating tapes for layer distribution.

DOMOCLICK DHB-400: End cap

Download Datasheet

Thermostat and electronic regulation for electric underfloor heating, heating cord, self-regulating heating cable for building, industry and refrigeration

There is two kinds of adhesive

  • Aluminium foil
  • Glass wool adhesive

ELTRACE offers you a set of termination and connection kits for all our heating ribbons and rollers:

  • Termination kits for our self-regulating heating cable type TRACECO - Reference ELKSR-1

  • Termination kits for our constant power parallel cables - Reference ELKS-1

  • Inline joining kits for extending a heating cable: ELJL reference

  • T-junction kits for branching, tapping: Reference ELJT

Go to top