Contact us right now !

  • Technical information on our heating cables ?
  • An RFQ for heating cables or any other question ...?
  • Contact us now our technical teams, commercial, logistics are at your disposal.

Contact us now

Self Regulating Heating Cable

Eltrace self-regulating heating cables are used for frost protection for pipe, tanks, containers, as well as for deicing eaves gutter and descents.

Avoid frost in negative cold rooms. To maintain the temperature of pipes, tanks, containers ... May be cut to any length and avoid overheating. Easy to use.

 

cordon chauffant GELTRACEFROST PROTECTING TAPE IS A RELIABLE AND ECONOMICAL SOLUTION TO YOUR PROBLEMS OF FROST PROTECTION

Thanks to the thermostat and the self limiting heating cable

Applications:
GELTRACE™ range is used for the frost protection of pipes. In the protigel™+ version, the thermostat automatically switches on the tape when the temperature falls under +5°C. It enables substantial energy savings and offers in complement the advantages and the safety of a self-regulating tape.
Avoids drainings and permanent use of hydraulic networks. Easy to implement. Available on stock.
Adjustable length according to the network size. Tape finished and controlled in the factory.
No overheating risk thanks to its self regulating system.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.

Description of GELTRACE self limiting heating cable

  1. Bus wire Cu nickel-plated (2×0.55mm²)
  2. Self limiting heating element
  3. Insulation
  4. Tin-plated copper protective earth wires with Protective aluminium foil
  5. Thermoplastique (TPE-O) outer jacket (Black)
  6. Thermostat 5°C
  7. Cold lead (1m 3x1.5mm²)

 

Reference    Designation     Power
GELTRACE-1 Self Limiting cable, 1m lenght, with 5°C thermostat and 1m cold lead   15 W at 10°C
GELTRACE-xx Self Limiting cable, 1m to 35m lenght, with 5°C thermostat, 1m cold lead (available from 1 to 35m) 15 W/m at 10°C
GELTRACE-35 Self Limiting cable, 35m lenght, with 5°C thermostat, 1m cold lead  450 W at 10°C

Read more: Ready to use GELTRACE self limiting heating cable

Self-regulating cable "Low temperature"

FROST PROTECTION AGAINST ICE AND LOW TEMPERATURE MAINTENANCE FOR PIPE,..

câble autorégulant chauffant

By using our tracers TRACECO® type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating. 

When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.

Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.

The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®

DESCRIPTION

Construction of the self regulating heating cable TRACECO

  1. Bus wire Cu nickel-plated (2x1.25mm²)
  2. Self limiting heating element
  3. Insultation
  4. Tin-plated copper protective earth wires with Protective aluminium foil
  5. Thermoplastique (TPE-O) outer jacket (Black) re

 

Self regulating heating cable TRACECO - Power curve

Courbe de puissance d'un câble autroégulant TRACECO

 

Datasheet of the heating cable

  • Nominal voltage 230V  
  • Tolerances -0/+5 W
  • Maximum exposure temperature (energised) 65°C
  • Maximum exposure temperature (deenergised) 80°C
  • Minimum installation temperature -35°C   
  • Temperature Class T6
  • Minimum Bending Radius 25 mm
  • Weight approx. 90-105 kg/km (alufoil)
  • Weight approx. 105-126 kg/km (braided)

Self Limiting Cable Maximal length:

  • TRACECO-10…………. 215 m
  • TRACECO-20…………. 170 m
  • TRACECO-30…………. 140 m
  • TRACECO-40…………. 120 m

Produits certifications : CSTB, EAC, CE, IP67, RoHS, REACH, UV-Resistant

 

Download Self Regulating Heating Cable TRACECO Datasheet

Self regulating heating cable "Medium temperature"

FOR TEMPERATURE MAINTENANCE, FOR DOMESTIC HOT WATER, WARM WATER PIPE, OILY WASTE WATER, TANK, VALVES, ALSO TO AVOID THE RISK OF LEGIONELLA, ,..

câble autorégulant chauffant

By using our heat tracer type TRACECO-W you get the best heat tracing system. They are designed to maintain networks of warm water temperature and avoid the risk of legionella.
Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.   
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClickTM

  1. Bus wire Cu nickel-plated (2x1.25mm²)
  2. Self limiting heating element
  3. Insultation
  4. Tin-plated copper protective earth wires with Protective aluminium foil
  5. Thermoplastique outer jacket

Self regulating heating cable power curve TRACECO-W

  Cable autorégulant chauffant TRACECO-W

  • Nominal Voltage 230V
  • Maximum length circuit:
    • TRACECO-W-65……… 110 m
    • TRACECO-W-55……… 130 m
  • Tolerances -0/+5 W
  • Maximum exposure temperature (energised) 80°C        
  • Maximum exposure temperature (deenergised) 100°C        
  • Minimum Bending Radius 27 mm
  • Minimum installation temperature -20°C
  • Weight approx 90 kg/km

Download the technical datasheet TRACECO-W heating cable

High Temperature Heating Cable (120°C / 200°C) for pipe, tank, corrosive atmosphere...

The ESR®-H-BOT serie is a self-limiting heating tape that is suitable for freeze protection and for temperature maintenance in applications up to 120 ºC.

Câble chauffant teflon

It allows steam cleaning in pipes. The heating element, the insulation and the outer jacket of the ESR-H-BOT are made of fluoropolymers.

The Fluoropolymer is Used as an outer jacket, this material offers increased protection against chemicals
and abrasion.

The heating power of the conductive heating element increases or decreases depending on the ambient
temperature. The self-limitation takes effect at every point along the heating tape. The heating power
adapts to the varying ambient temperatures.
High Temp. Heat Tracing

Cable Construction

  1. Copper, nickel-coated 1.25 mm2
  2. Heating element : Conductive fluoropolymer
  3. Fluoropolymer
  4. Braid
  5. Fluoropolymer Overjacket

DATASHEET

  • Nominal Voltage 230V

  • Tolerances -2.5/+2.5 W

  • Maximum exposure temperature (energised) 120°C        

  • Maximum exposure temperature (deenergised) 200°C         

  • Temperature Class T3 (T2 for 60w/m)               

  • Minimum Bending Radius 25 mm

  • Minimum installation temperature -40°C

  • Weight approx 120 kg/km

 Maximum heating cable length circuit:

  • ESR-H-2-BOT-10………….. 205 m

  • ESR-H-2-BOT-15………….. 190 m

  • ESR-H-2-BOT-30………….. 115 m

  • ESR-H-2-BOT-45………….. 85 m

  • ESR-H-2-BOT-60………….. 65 m

Qualification Produits

Certifications ATEX, GOST-R, EAC, CE

Download ESR-H-BOT heating cable DataSheet

Self Limiting Heating Cable - Special COLD ROOM

To Protect Sliding Doors and Opening Doors From Freezing Up - Special Cold Room

Cordon porte de chambre froide, frigo

  • Bus wire Cu nickel-plated (2x0.55mm²) 19×0,287 mm
  • Self limiting heating element (matrix)
  • Insultation (polyolefine)


Reference    Designation    Power     Dimension
ESR-R-30    TRACECO-R - ESR-R-30    27 W/m at 0°C    6.10×5.60 (mm)
ESR-R-40    TRACECO-R - ESR-R-40    38 W/m at0°C    6.10×5.60  (mm)

Power curveSelf Regulating Cable Datasheet

  • Nominal Voltage: 230V                        
  • Maximum length circuit:
    • ESR-R-30…………. 110 m
    • ESR-R-40…………. 110 m
  • Tolerances: -0/+5W                            
  • Maximum exposure temperature (energised): 50°C       
  • Maximum exposure temperature (deenergised): 55°C        
  • Minimum Bending Radius: 30 mm
  • Minimum installation temperature: -35°C
  • Weight approx. 41.5 kg/km

Heating Cable Qualification

EAC, RoHS, REACH

Download ESR-R heating cable DataSheet

Low temperature Self regulating heat cable for corrosive atmosphere

Frost protection and low temperature maintenance for pipe, tank container, in corrosive atmosphere...

Câble chauffant teflon

The ESR-BOT tape is a self-limiting heating tape for applications for general protection against freezing in pipes. An additional layer connected to the heating element (bonded jacket) increases the effect of the electrical insulation and provides additional protection against moisture.
Fluoropolymer is used as an outer jacket, this material offers increased protection against chemicals
and abrasion. Fluoropolymers are also UV-resistant.
When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.
Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs.
The Box storage system on coil allows easy handling, quick and convenient. This product is in stock and can be used with the fast connector system DomoClick®

DESCRIPTION

  1. Bus wire Cu nickel-plated (2x1.25mm²)
  2. Self limiting heating element, Matrix
  3. Insulation
  4. Braid
  5. Fluoropolymer overjacket
Reference Designation Power Dimension
ESR-10-BOT ESR-2-BOT-10 10 W/m at 10°C 11,50 x 5,50 (mm)
ESR-15-BOT ESR-2-BOT-15 15 W/m at 10°C 11,50 x 5,50 (mm
ESR-20-BOT ESR-2-BOT-20 20 W/m at 10°C 11,50 x 5,50 (mm)
ESR-25-BOT ESR-2-BOT-25  25 W/m at 10°C 11,50 x 5,50 (mm)
ESR-30-BOT ESR-2-BOT-33 33 W/m at 10°C 11,50 x 5,50 (mm)

 

 

 

 

 

 

 

Product Qualification

ATEX, GOST-R, EAC, CE

Download ESR-BOT heat cable datasheet

Small Size Heating Cable TRACECO-S-15

ELTRACE Self Limiting Cable TRACECO-S

 

Frost Protection against ice and low temperature maintenance for Pipe, Tank, Receptacles, valves, gutters…

By using our tracers TRACECO(TM) type, you ensure the best heat-tracing system. They are designed to prevent any risk of burst pipes due to freezing. Self Limiting or Self Regulating Technology allows easy operation safely. The power changes depending on the temperature and prevents overheating.

When it is cold, the polymer shrinks and facilitates the flow of current, thereby increasing the temperature of the cable. As it gets warmer, the polymer expands and prevents the current: the Self Regulating cable heats less than before.

Finally, a « parallel » technology allows the cable to be cut to desired length directly on the site. Exact fit the length of heating cable for your needs. The Box storage system on coil allows easy handling, quick and convenient.

Self regulating heat cable description

  • Bus wire Cu nickel-plated (2×0.55mm²)
  • Self limiting heating element
  • Insultation
  • Tin-plated copper protective earth wires with Protective aluminium foil
  • Thermoplastique (TPE-O) outer jacket (Black)
Reference Désignation Power Dimension (first insulation) Dimension (overjacketed)
TRACECO-15 TRACECO ESR-S-12-AO 12 W/m at 10°C 6.40×3.80 (mm) 8.10×5.30 (mm)

TRACECO-S-12 - Power Curve for Self Limiting CableDatasheet

  • Nominal lVoltage: 230V
  • Tolerances: -0/+5 W
  • Maximum length circuit: TRACECO-S-12: 110 m
  • Maximum exposure temperature (energised): 65°C
  • Maximum exposure temperature (deenergised): 80°C
  • Minimum installation temperature: <-35°C
  • Temperature Class: T6
  • Minimum Bending Radius: 27 mm
  • Weight approx (alufoil): 66 kg/km
  • Weight approx (Braided): 72 kg/km

Cable Qualification

CSTB, EAC, CE, IP67, RoHS, REACH, UV-Resistant

Download the Self Regulating Heating cable TRACECO-S Datasheet

What is self-regulating heating cable?
What are the advantages of heating cables?
What are the main applications, where electrical self limiting heating cables are used?Autorégulation

Download Self Regulating Heating Cables Datasheet

Read more: Definition of a self regulating heating cable

Go to top