TRASSANEIGE « Gutter » FOR GUTTER HEATING

Download the Datasheet: TRASSANEIGE Gutter Heating


The implementation is fast, it is simply necessary to respect the precautions of use for a good operation of the TRASSANEIGE kit. The TRASSANEIGE kit protects your gutters and gutters against frost and snow accumulation. It is compatible with all materials (zinc, copper, stainless steel, galva, aluminum, lacquered steel ...).

Composition of the Gutter Heating Cable Kit Protection

Heating cable with 5 m cold connection, built-in thermostat for frost protection and plug. The heating element of the TRASSANEIGE kit is a self-regulating heating cable whose dissipated power decreases when the temperature of the gutter increases.

Reference Heating length Power at 10°C
TRASSANEIGE-6 6m 180W
TRASSANEIGE-10 10m 300W
TRASSANEIGE-15 15m 450W
TRASSANEIGE-30 30m 900W
TRASSANEIGE-xx on demand On demand

Gutter Heating Cable Installation

  1. Lay the heating cable flat without attaching it to the entire length of the gutter. If you want to fix it, use adhesive clips or other (accessories not provided by ELTRACE), in being careful not to damage it.
  2. Place the thermostat probe against the gutter to protect it from the sun (avoid disturbing the temperature measured by the thermostat).
  3. For downspouts with a diameter greater than 500mm, a round trip with the heating cable is necessary. Remember to fit a radius of curvature of the cable of at least 27mm. Lower the cable down the gutter down its entire height
  4. Plug the plug into an electrical outlet. The integrated thermostat will switch on the power when necessary (temperature below + 4°C).

Important Information

In accordance with NF C15-100